Luggage Wheel Walking Testing Machine
|FOB Price:||US $3,000-6,000 / Set|
|Min. Order:||1 Set|
|Min. Order||FOB Price|
|1 Set||US $3,000-6,000/ Set|
|Production Capacity:||800 Sets Per Year|
|Transport Package:||Wooden Case|
|Payment Terms:||L/C, T/T, Western Union|
- Model NO.: HS-5076-B
- Maxcapacity: <1000KN
- Load Way: Electronic Load
- Display: Digital
- Weight: 0-100Kg
- Oil Cylinder Position: Under
- Driven: Electric
- Delivery: 15 Working Days
- Specification: ISO
- HS Code: 902480000
- Type: Friction Testing Machine
- Accuracy Grade: 0.5
- Loading Method: Dynamic Load
- Control: Manual Control
- Power Source: AC220V
- Wheel Size: 175mm
- Life: 10-20 Years , If in Good Maintain , May Longer
- Trademark: HS
- Origin: China
This test machine was designed as per standard QB/T 2917-2007. The purpose is to test whee abrasion resistance ability
Standard: QB/T 2917-2007
|Wheel diameter||175 mm|
|Roller Rotation Speed||102 rpm|
|Belt Stroke||2.23 mile/hr|
|Dimension (W × D × H)||150 × 70 × 190 cm|
|Power||1∮,AC 220V,5A (or specified)|
Provide consultation advice for you
Train by remote vedio or other methods.
Calibration, repair, maintenance (If you need , we can also help you repair your test machine which you buy from other place and they don't repair for you ) .
The resistance of materials and structures to abrasion can be measured by a variety of test methods.These often use a specified abrasive or other controlled means of abrasion. Under the conditions of the test, the results can be reported or can be compared items subjected to similar tests.
Such standardized measurements can produce two quantities: abrasion rate and normalized abrasion rate (also called abrasion resistance index). The former is the amount of mass lost per 1000 cycles of abrasion. The latter is the ratio of former with the known abrasion rate for some specific reference material.
One type of instrument used to get the quantities abrasion rate and normalized abrasion rate, is the abrasion scrub tester. This instrument is made up of a mechanical arm, liquid pump, and programmable electronics. The machine draws the mechanical arm with attached brush (or sandpaper, sponge, etc.) over the surface of the material that is being tested. The operator sets a pre-programmed number of passes for a repeatable and controlled result. The liquid pump can provide detergent or other liquids to the mechanical arm during testing to simulate washing and other normal uses.
The use of proper lubricants can help control abrasion in some instances. Some items can be covered with an abrasion resistant material. Controlling the cause of abrasion is sometimes an option.